LUXANO 2
167 15LG2 VARIO SENS-S
LED damp-proof light fitting LUXANO 2 with variably adjustable luminous flux. Glass fibre reinforced polyester housing, frosted diffuser, foamed gasket and stainless steel clips. Powder-coated reflector with LED modules and ECG and integrated motion sensor, variable cable entry and stainless steel mounting clips for quick and easy mounting.
Article number: 16700 0046
EAN/GTIN: 4041254451022
General product description
General product benefits
universally usable due to variable setting of the luminous flux depending on the requirement
4-step variable luminous flux setting
quick and easy adjustment on-site
adjustable at any time (e.g. change of use of the premises with new requirements in regard to the level of illumination
high energy saving potential by integrated motion sensor and needs-based light control
detection range, follow-up time and daylight sensor adjustable in line with demands
parameter setting with a potentiometer on the HF sensor
high-quality light fitting with high quality electrical components of renowned manufacturers
homogenous illumination due to frosted diffuser, comfortable perception of light and brilliant glare limitation
stainless steel clips
variable cable entry at the front, lengthways and at the top
FastFix mounting system with stainless steel mounting clips for variable mounting distances without opening the light fitting
interchangeable components
Applications
humid, wet and dusty indoor areas and sheltered outdoor areas in commerce, trade and industry etc.
areas, where one standardised LED-light fitting with variable setting of luminous flux shall be used for different illumination tasks
areas with high energy saving potential at times without public access, e.g. storage areas, car parks, areas where a 24/7 illumination is required
for damp and cold ambient conditions with low duty cycles, please contact us
Key technical data
| Light source | LED |
|---|---|
| Exchangeability | light source and control gear replaceable by qualified person |
| Connected load | 25 W, 43 W |
| Luminaire luminous flux | 3800 lm, 6200 lm |
| Luminous efficacy | 152 lm/W, 144 lm/W |
| Colour temperature | 4000 K |
| Colour rendering (CRI) | ≥ 80 |
| Light colour | 840 |
| Admissible ambient temperature Tₐ min | -20 °C |
| Admissible ambient temperature Tₐ max | +35 °C |
| Control gear | ECG |
| No. of control gears | 1 |
| Overload protection | ✓ |
| Short circuit protection | ✓ |
| Energy efficiency class | D |
| Special features | 4-step adjustment luminous flux / connected load (Attention: only min, max values listed above). |
Lighting control
| Sensor | HF-sensor |
|---|
Lighting technology
| Light distribution | symmetrical wide beam |
|---|---|
| Beam angle | 120 ° |
| Photobiological safety | RG1 |
Service life
| Service life LED | L80>100000 h (@Ta 25°C), L70>100000 h (@ Ta max) |
|---|
Electrical connection
| Rated voltage | 220 - 240 V |
|---|---|
| Frequency | 50/60 Hz |
| Voltage range AC | 198 - 264 V |
| Connection type | Cage clamp |
| Terminal clamp | 4-polig |
| Clamping range | 0.75 - 2.5 mm² |
| Max. no. with circuit breaker B16 | 25 |
| CB B10/B13/B20 | 16/21/32 |
| CB C10/C13/C16/C20 | 26/33/42/52 |
| Cable entries type | blanking plug (2x) |
| Cable entries size | M20 (2x) |
| Cable gland material | Plastic |
| Cable gland cable diameter | 8 - 15 mm |
Features/Certificates
| Protection class | I |
|---|---|
| IP rating | IP65 |
| IK rating | IK05 |
| Limited surface temperature D | ✓ |
| CE | ✓ |
Mounting
| Mounting method (accessories possibly needed) | Ceiling, Wall, Ceiling with bracket, Ceiling with angle, Wall with bracket, Wall with angle, Suspended, Mounting rail |
|---|---|
| Operating position | downwards radiation, forwards radiation, horizontal |
| Mounting | fast mounting system FastFix, 2-point |
Housing
| Housing material | Glass fibre reinforced polyester |
|---|---|
| Colour | grey |
Cover
| Cover type | Diffuser |
|---|---|
| Cover material | PMMA |
| Cover characteristic | satined |
| Closure type | Clips |
| Closure material | Stainless steel (1.4310) |
Dimension/Weight
| Length | 1477.00 mm |
|---|---|
| Width / Diameter | 85.00 mm |
| Height | 88.00 mm |
| Net weight | 1.94 kg |
LED damp-proof light fitting, LUXANO 2, 25 W, 43 W, 3800 lm, 6200 lm, 152 lm/W, 144 lm/W, Class I, IP65, symmetrical wide beam, 4000 K, CRI≥ 80, Ta -20 °C/+35 °C, L80>100000 h (@Ta 25°C), L70>100000 h (@ Ta max), HF-sensor, Diffuser PMMA satined, Closure Stainless steel (1.4310), Housing Glass fibre reinforced polyester, Colour grey, variable 4-step adjustment luminous flux/connected load (Attention: only min, max values listed above). LED damp-proof light fitting LUXANO 2 with variably adjustable luminous flux. Glass fibre reinforced polyester housing, frosted diffuser, foamed gasket and stainless steel clips. Powder-coated reflector with LED modules and ECG and integrated motion sensor, variable cable entry and stainless steel mounting clips for quick and easy mounting. interchangeability of components (no disposable light fitting) Length 1477,00 mm, Width / Diameter 85,00 mm, Height 88,00 mm, Net weight 1,94 kg.
Gross price: 125.00 EUR