PROXIMA
161PX 12L22 SENS-Z30
Sturdy LED damp-proof light fitting with highly impact-resistant glass fibre reinforced polyester housing and frosted diffuser with high mechanical resistance. Captive safety clips, multi-part, silicone gasket. Powder-coated aluminium reflector with highly efficient Zhaga LED modules dimmable ECG with overload and short circuit protection, dimming mode "Corridor Mode" and integrated motion sensor. FastFix mounting system with sliding stainless steel mounting clips and brackets for chain suspension.
Article number: 16130 0052
EAN/GTIN: 4041254377094
General product description
General product benefits
high energy saving potential by integrated motion sensor and needs-based light control
detection range, follow-up time and daylight sensor adjustable in line with demands
parameter setting with a potentiometer on the HF sensor or with an infrared remote control
sturdy, extremely reliable high-quality light fitting for application in rough industrial environments
high impact-resistant housing, wall thickness 1.8mm
diffuser with high mechanical resistance, wall thickness 2.0mm
sturdy safety clips to ensure protection against accidental contact
FastFix mounting system with stainless steel mounting clips for variable mounting distances
front-side in/out wiring possible as standard
variable cable entry possible through additional entries on the top of the enclosure at the front or in the centre, centring holes available
homogenous illumination due to frosted diffuser, comfortable perception of light
interchangeable components
future proof by using standardised Zhaga LED modules
Applications
humid, wet and dusty indoor areas and sheltered outdoor areas in commerce, trade and industry etc.
areas with high energy saving potential at times without public access, e.g. storage areas, car parks, areas where a 24/7 illumination is required
for damp and cold ambient conditions with low duty cycles, please contact us
Key technical data
| Light source | LED |
|---|---|
| LED module standard | Zhaga |
| Exchangeability | light source and control gear replaceable by qualified person |
| Connected load | 15 W |
| Luminaire luminous flux | 2440 lm |
| Luminous efficacy | 163 lm/W |
| Colour temperature | 4000 K |
| Colour rendering (CRI) | ≥ 80 |
| Light colour | 840 |
| Admissible ambient temperature Tₐ min | -20 °C |
| Admissible ambient temperature Tₐ max | +40 °C |
| Control gear | ECG |
| No. of control gears | 1 |
| Overload protection | ✓ |
| Short circuit protection | ✓ |
| Energy efficiency class | B |
Lighting control
| Dimmable | ✓ |
|---|---|
| Dimming method | Corridor mode (DIMC) |
| Dimming range | 10 - 100 % |
| Sensor | HF-sensor |
| Special features | Automatic switch-off (30 minutes 10% background level, then the light switches off [0%]) |
Lighting technology
| Light distribution | symmetrical wide beam |
|---|---|
| Beam angle | 120 ° |
| Photobiological safety | RG1 |
Service life
| Service life LED | L90>50000 h (@ Ta max), L80>100000 h (@ Ta max) |
|---|
Electrical connection
| Rated voltage | 220 - 240 V |
|---|---|
| Frequency | 50/60 Hz |
| Voltage range AC | 198 - 264 V |
| Connection type | Cage clamp |
| Terminal clamp | 4-polig |
| Clamping range | 0.75 - 2.5 mm² |
| Max. no. with circuit breaker B16 | 22 |
| CB B10/B13/B20 | 14/18/28 |
| CB C10/C13/C16/C20 | 22/29/37/45 |
| Cable entries type | blanking plug (3x) |
| Cable entries size | M20 (3x) |
| Cable gland material | Plastic |
| Cable gland cable diameter | 8 - 15 mm |
| In-out wiring (RR) | ✓ |
Features/Certificates
| Protection class | I |
|---|---|
| IP rating | IP65 |
| IK rating | IK06 |
| Limited surface temperature D | ✓ |
| CE | ✓ |
Mounting
| Mounting method (accessories possibly needed) | Ceiling, Wall, Ceiling with bracket, Ceiling with angle, Wall with bracket, Wall with angle, Suspended, Mounting rail |
|---|---|
| Operating position | downwards radiation, forwards radiation, horizontal, vertical |
| Mounting | fast mounting system FastFix, 2-point |
Housing
| Housing material | Glass fibre reinforced polyester |
|---|---|
| Colour | grey |
Cover
| Cover type | Diffuser |
|---|---|
| Cover material | PMMA |
| Cover characteristic | satined |
| Closure type | Clips |
| Closure material | Plastic |
Dimension/Weight
| Length | 1278.00 mm |
|---|---|
| Width / Diameter | 137.00 mm |
| Height | 115.00 mm |
| Net weight | 2.85 kg |
LED damp-proof light fitting, PROXIMA, 15 W, 2440 lm, 163 lm/W, Class I, IP65, symmetrical wide beam, 4000 K, CRI≥ 80, Ta -20 °C/+40 °C, L90>50000 h (@ Ta max), L80>100000 h (@ Ta max), Corridor mode (DIMC), HF-sensor, Diffuser PMMA satined, Closure Plastic, Housing Glass fibre reinforced polyester, Colour grey. Sturdy LED damp-proof light fitting with highly impact-resistant glass fibre reinforced polyester housing and frosted diffuser with high mechanical resistance. Captive safety clips, multi-part, silicone gasket. Powder-coated aluminium reflector with highly efficient Zhaga LED modules dimmable ECG with overload and short circuit protection, dimming mode "Corridor Mode" and integrated motion sensor. FastFix mounting system with sliding stainless steel mounting clips and brackets for chain suspension. interchangeability of components (no disposable light fitting) Length 1278,00 mm, Width / Diameter 137,00 mm, Height 115,00 mm, Net weight 2,85 kg.
Gross price: 408.00 EUR