PROXIMA
161PX 15L150 AUS
Sturdy LED damp-proof light fitting for application in unprotected outdoor areas. Highly impact-resistant glass fibre reinforced polyester housing and frosted PMMA diffuser with high impact and UV resistance. Captive safety clips, multi-part, silicone gasket and pressure compensation system. Powder-coated aluminium reflector with highly efficient Zhaga LED modules and ECG with overload and short circuit protection. FastFix mounting system with sliding stainless steel mounting clips and brackets for chain suspension.
Article number: 16131 0010
EAN/GTIN: 4041254375694
General product description
General product benefits
sturdy, extremely reliable high-quality light fitting for application in unprotected outdoor areas
high impact resistant housing, chemical and UV resistant
PMMA diffuser with high mechanical and UV-resistance
UV, ozone, weather, chemical and ageing resistant profile gasket
pressure compensation system to prevent condensation inside the light fitting
sturdy safety clips to ensure protection against accidental contact
FastFix mounting system with stainless steel mounting clips for variable mounting distances
front-side in/out wiring possible as standard
variable cable entry possible through additional entries on the top of the enclosure at the front or in the centre, centring holes available
homogenous illumination due to frosted diffuser, comfortable perception of light
interchangeable components
future proof by using standardised Zhaga LED modules
Applications
humid, wet and dusty indoor areas and sheltered outdoor areas in commerce, trade and industry etc.
unprotected outdoor areas, e.g. mounted to industrial plants, external gangways, stairs, walls, ceilings, doors, bus stops, train stations, subways, construction sites, under canopies etc. The light is not to be used in areas with high mechanical stress (wind) or seldom usage (i.e. maintenance and inspection only, please use light fittings from the 144..AUS or PRIMO XR series)
for damp and cold ambient conditions with low duty cycles, please contact us
Key technical data
| Light source | LED |
|---|---|
| LED module standard | Zhaga |
| Exchangeability | light source and control gear replaceable by qualified person |
| Connected load | 93 W |
| Luminaire luminous flux | 15180 lm |
| Luminous efficacy | 163 lm/W |
| Colour temperature | 4000 K |
| Colour rendering (CRI) | ≥ 80 |
| Light colour | 840 |
| Admissible ambient temperature Tₐ min | -20 °C |
| Admissible ambient temperature Tₐ max | +35 °C |
| Control gear | ECG |
| No. of control gears | 0 |
| Overload protection | ✓ |
| Short circuit protection | ✓ |
| Energy efficiency class | B |
Lighting technology
| Light distribution | symmetrical wide beam |
|---|---|
| Beam angle | 120 ° |
| Photobiological safety | RG1 |
Service life
| Service life LED | L90>50000 h (@ Ta max), L80>100000 h (@ Ta max) |
|---|
Electrical connection
| Rated voltage | 220 - 240 V |
|---|---|
| Frequency | 50/60 Hz |
| Voltage range AC | 198 - 264 V |
| Connection type | Cage clamp |
| Terminal clamp | 3-polig |
| Clamping range | 0.75 - 2.5 mm² |
| Max. no. with circuit breaker B16 | 18 |
| CB B10/B13/B20 | 12/15/23 |
| CB C10/C13/C16/C20 | 18/24/30/37 |
| Cable entries type | pressure compensation element (1x), cable gland (2x), screw plug (1x) |
| Cable entries size | M20 (3x) |
| Cable gland material | Plastic |
| Cable gland cable diameter | 6 - 13 mm |
| In-out wiring (RR) | ✓ |
Features/Certificates
| Protection class | I |
|---|---|
| IP rating | IP65 |
| IK rating | IK06 |
| Limited surface temperature D | ✓ |
| CE | ✓ |
Mounting
| Mounting method (accessories possibly needed) | Ceiling, Ceiling with bracket, Ceiling with angle, Pole with pipe clamp, Pipe clamp, Wall, Wall with bracket, Wall with angle |
|---|---|
| Operating position | downwards radiation, forwards radiation, horizontal |
| Mounting | fast mounting system FastFix, 2-point |
Housing
| Housing material | Glass fibre reinforced polyester |
|---|---|
| Colour | grey |
Cover
| Cover type | Diffuser |
|---|---|
| Cover material | PMMA |
| Cover characteristic | satined |
| Closure type | Clips |
| Closure material | Plastic |
Other features
| Pressure compensation system | ✓ |
|---|
Dimension/Weight
| Length | 1578.00 mm |
|---|---|
| Width / Diameter | 137.00 mm |
| Height | 115.00 mm |
| Net weight | 3.70 kg |
LED damp-proof light fitting, PROXIMA, 93 W, 15180 lm, 163 lm/W, Class I, IP65, symmetrical wide beam, 4000 K, CRI≥ 80, Ta -20 °C/+35 °C, L90>50000 h (@ Ta max), L80>100000 h (@ Ta max), Diffuser PMMA satined, Closure Plastic, Housing Glass fibre reinforced polyester, Colour grey, for unprotected outdoor areas (AUS). Sturdy LED damp-proof light fitting for application in unprotected outdoor areas. Highly impact-resistant glass fibre reinforced polyester housing and frosted PMMA diffuser with high impact and UV resistance. Captive safety clips, multi-part, silicone gasket and pressure compensation system. Powder-coated aluminium reflector with highly efficient Zhaga LED modules and ECG with overload and short circuit protection. FastFix mounting system with sliding stainless steel mounting clips and brackets for chain suspension. interchangeability of components (no disposable light fitting) Length 1578,00 mm, Width / Diameter 137,00 mm, Height 115,00 mm, Net weight 3,70 kg.
Gross price: 371.00 EUR