PROXIMA
161PX 12L42 DIMC
Sturdy LED damp-proof light fitting with highly impact-resistant glass fibre reinforced polyester housing and frosted diffuser with high mechanical resistance. Captive safety clips, multi-part, silicone gasket. Powder-coated aluminium reflector with highly efficient Zhaga LED modules and dimmable ECG with overload and short circuit protection as well as dimming mode "Corridor Mode". FastFix mounting system with sliding stainless steel mounting clips and brackets for chain suspension.
Article number: 16130 0025
EAN/GTIN: 4041254375144
General product description
General product benefits
high energy saving potential by needs-based light control
sturdy, extremely reliable high-quality light fitting for application in rough industrial environments
high impact-resistant housing, wall thickness 1.8mm
diffuser with high mechanical resistance, wall thickness 2.0mm
sturdy safety clips to ensure protection against accidental contact
FastFix mounting system with stainless steel mounting clips for variable mounting distances
front-side in/out wiring possible as standard
variable cable entry possible through additional entries on the top of the enclosure at the front or in the centre, centring holes available
homogenous illumination due to frosted diffuser, comfortable perception of light
interchangeable components
future proof by using standardised Zhaga LED modules
Applications
humid, wet and dusty indoor areas and sheltered outdoor areas in commerce, trade and industry etc.
areas where light fittings are controlled via motion sensor or door contact, e.g. storage areas, shelf aisles, areas with high energy saving potential at times without public access, e.g. car parks, areas where a 24/7 illumination is required
for damp and cold ambient conditions with low duty cycles, please contact us
Key technical data
| Light source | LED |
|---|---|
| LED module standard | Zhaga |
| Exchangeability | light source and control gear replaceable by qualified person |
| Connected load | 27 W |
| Luminaire luminous flux | 4300 lm |
| Luminous efficacy | 159 lm/W |
| Colour temperature | 4000 K |
| Colour rendering (CRI) | ≥ 80 |
| Light colour | 840 |
| Admissible ambient temperature Tₐ min | -20 °C |
| Admissible ambient temperature Tₐ max | +40 °C |
| Control gear | ECG |
| No. of control gears | 1 |
| Overload protection | ✓ |
| Short circuit protection | ✓ |
| Energy efficiency class | B |
Lighting control
| Dimmable | ✓ |
|---|---|
| Dimming method | Corridor mode (DIMC) |
| Dimming range | 10 - 100 % |
| Special features | Automatic cutoff deactivated (light fitting never switches off and provides a background illumination of 10%) |
Lighting technology
| Light distribution | symmetrical wide beam |
|---|---|
| Beam angle | 120 ° |
| Photobiological safety | RG1 |
Service life
| Service life LED | L90>50000 h (@ Ta max), L80>100000 h (@ Ta max) |
|---|
Electrical connection
| Rated voltage | 220 - 240 V |
|---|---|
| Frequency | 50/60 Hz |
| Voltage range AC | 198 - 264 V |
| Connection type | Cage clamp |
| Terminal clamp | 4-polig |
| Clamping range | 0.75 - 2.5 mm² |
| Max. no. with circuit breaker B16 | 22 |
| CB B10/B13/B20 | 14/18/28 |
| CB C10/C13/C16/C20 | 22/29/37/45 |
| Cable entries type | blanking plug (3x) |
| Cable entries size | M20 (3x) |
| Cable gland material | Plastic |
| Cable gland cable diameter | 8 - 15 mm |
| In-out wiring (RR) | ✓ |
Features/Certificates
| Protection class | I |
|---|---|
| IP rating | IP65 |
| IK rating | IK06 |
| Limited surface temperature D | ✓ |
| CE | ✓ |
| VDE | ✓ |
| ENEC | ✓ |
Mounting
| Mounting method (accessories possibly needed) | Ceiling, Wall, Ceiling with bracket, Ceiling with angle, Wall with bracket, Wall with angle, Suspended, Mounting rail |
|---|---|
| Operating position | downwards radiation, forwards radiation, horizontal, vertical |
| Mounting | fast mounting system FastFix, 2-point |
Housing
| Housing material | Glass fibre reinforced polyester |
|---|---|
| Colour | grey |
Cover
| Cover type | Diffuser |
|---|---|
| Cover material | PMMA |
| Cover characteristic | satined |
| Closure type | Clips |
| Closure material | Plastic |
Dimension/Weight
| Length | 1278.00 mm |
|---|---|
| Width / Diameter | 137.00 mm |
| Height | 115.00 mm |
| Net weight | 2.80 kg |
LED damp-proof light fitting, PROXIMA, 27 W, 4300 lm, 159 lm/W, Class I, IP65, symmetrical wide beam, 4000 K, CRI≥ 80, Ta -20 °C/+40 °C, L90>50000 h (@ Ta max), L80>100000 h (@ Ta max), Corridor mode (DIMC), Diffuser PMMA satined, Closure Plastic, Housing Glass fibre reinforced polyester, Colour grey. Sturdy LED damp-proof light fitting with highly impact-resistant glass fibre reinforced polyester housing and frosted diffuser with high mechanical resistance. Captive safety clips, multi-part, silicone gasket. Powder-coated aluminium reflector with highly efficient Zhaga LED modules and dimmable ECG with overload and short circuit protection as well as dimming mode "Corridor Mode". FastFix mounting system with sliding stainless steel mounting clips and brackets for chain suspension. interchangeability of components (no disposable light fitting) Length 1278,00 mm, Width / Diameter 137,00 mm, Height 115,00 mm, Net weight 2,80 kg.
Gross price: 284.00 EUR