TUBEO
110 15L60 865
LED tubular light-fitting TUBEO with impact-resistant clear tube Ø 100mm, stainless steel locking caps, foamed silicone gasket and special element for length compensation. Powder-coated sheet steel reflector with Zhaga LED modules, frosted LED covers for glare limitation and ECG with overload and short circuit protection. Electrical connection by connection plug (FastConnect), male connector pre-installed, female with strain relief attached. Two stainless steel pipe clamps included.
Article number: 11000 0106
EAN/GTIN: 4041254284293
General product description
General product benefits
sturdy, extremely rugged tubular light fitting for application in rough environments
dust- and pressure water-proof
suitable for high-pressure or steam cleaning (IPX9K)
highly efficient by using high-quality LED modules
colour rendering index CRI>80, according to the workplace guidelines suitable for nearly all plant locations
homogenous illumination due to frosted protective covers on the LED modules, comfortable perception of light and brilliant glare limitation
FastConnect - quick connection without opening the light fitting
variable mounting distances due to pipe clamps
interchangeable components
future proof by using standardised Zhaga LED modules
Applications
areas, which are endangered by water jets, e.g.car washs, inspection pits, docks, ships, slaughterhouses etc.
light fitting is not suitable for use in areas with saline atmosphere
for damp and cold ambient conditions with low duty cycles, please contact us
Key technical data
| Light source | LED |
|---|---|
| LED module standard | Zhaga |
| Exchangeability | light source and control gear replaceable by qualified person |
| Connected load | 39 W |
| Luminaire luminous flux | 6160 lm |
| Luminous efficacy | 158 lm/W |
| Colour temperature | 6500 K |
| Colour rendering (CRI) | ≥ 80 |
| Light colour | 865 |
| Admissible ambient temperature Tₐ min | -25 °C |
| Admissible ambient temperature Tₐ max | +35 °C |
| Control gear | ECG |
| No. of control gears | 1 |
| Overload protection | ✓ |
| Short circuit protection | ✓ |
| Energy efficiency class | B |
Lighting technology
| Optical system | Diffuser |
|---|---|
| Optical system material | PMMA |
| Light distribution | symmetrical wide beam |
| Beam angle | 120 ° |
| Photobiological safety | RG1 |
Service life
| Service life LED | L90>50000 h (@ Ta 25°C), L80>70000 h (@ Ta max), L70>100000 h (@ Ta max) |
|---|
Electrical connection
| Rated voltage | 220 - 240 V |
|---|---|
| Frequency | 50/60 Hz |
| Voltage range AC | 198 - 264 V |
| Connection type | Plug |
| Terminal clamp | 3-polig |
| Clamping range | 0.75 - 2.5 mm² |
| Max. no. with circuit breaker B16 | 26 |
| CB B10/B13/B20 | 17/22/33 |
| CB C10/C13/C16/C20 | 27/35/44/54 |
| Cable gland material | Plastic |
| Cable gland cable diameter | 6 - 10 mm |
Features/Certificates
| Protection class | I |
|---|---|
| IP rating | IP68 (3m), IPX9K |
| IK rating | IK07 |
| Limited surface temperature D | ✓ |
| CE | ✓ |
Mounting
| Mounting method (accessories possibly needed) | Ceiling, Wall |
|---|---|
| Operating position | horizontal, vertical |
| Mounting | 2-point |
| Special features | 2 stainless steel pipe clamps (included in scope of delivery) |
Housing
| Varnished | - |
|---|
Cover
| Cover type | Tube |
|---|---|
| Cover material | PMMA |
| Cover characteristic | clear |
| Closure type | screwed |
| Closure material | Stainless steel (1.4571) |
Dimension/Weight
| Length | 1655.00 mm |
|---|---|
| Width / Diameter | 133.00 mm |
| Height | 117.00 mm |
| Net weight | 5.08 kg |
LED tubular light fitting, TUBEO, 39 W, 6160 lm, 158 lm/W, Class I, IP68 (3m), IPX9K, symmetrical wide beam, 6500 K, CRI≥ 80, Ta -25 °C/+35 °C, L90>50000 h (@ Ta 25°C), L80>70000 h (@ Ta max), L70>100000 h (@ Ta max), Tube PMMA clear, Closure Stainless steel (1.4571), stainless steel pipe clamps included, for unprotected outdoor areas (AUS). LED tubular light-fitting TUBEO with impact-resistant clear tube Ø 100mm, stainless steel locking caps, foamed silicone gasket and special element for length compensation. Powder-coated sheet steel reflector with Zhaga LED modules, frosted LED covers for glare limitation and ECG with overload and short circuit protection. Electrical connection by connection plug (FastConnect), male connector pre-installed, female with strain relief attached. Two stainless steel pipe clamps included. interchangeability of components (no disposable light fitting) Length 1655,00 mm, Width / Diameter 133,00 mm, Height 117,00 mm, Net weight 5,08 kg.