PRIMO XR
107 15L34 XR
Extremely gas-tight LED tubular light fitting for areas exposed to harmful gases. Frosted, impact-resistant PMMA tube, welded with end-/connection caps. Aluminum reflector with highly efficient LED modules and ECG with overload and short-circuit protection. Electrical connection via plug connection system (FastConnect), male connector integrated in connection cap, female attached. Two stainless steel pipe clamps, included in the scope of delivery, for quick and easy mounting.
Article number: 10702 0004
EAN/GTIN: 4041254343075
General product description
General product benefits
hermetically sealed due to welding of tube and end caps as well as perfectly sealed quick connector
protection of LED modules and ECG from damage and total failure due to exposure to harmful gases
dust and pressure water tight (IP68 3m/30min)
suitable for high-pressure or steam cleaning (IPX9K tested)
applicable in unprotected outdoor areas
Swimming pool light fitting
highly impact resistant PMMA tube with high mechanical strength
homogeneous illumination thanks to frosted tube, no single light points visible, comfortable perception of light, brilliant glare limitation
quick mains connection thanks to integrated "FastConnect" plug connection system
quick mounting with variable mounting distances thanks to sliding stainless steel pipe clamps
Applications
areas with vapours and gases (harmful gases) that can damage the LED up to total failure, e.g. ammonia and sulfur compounds in the chemical industry, in paper manufacture or in tire production and storage
areas, which are endangered by water jets, e.g.car washs, inspection pits, docks, ships, slaughterhouses etc.
protected and unprotected outdoor areas with high mechanical strains, e.g. areas with high wind loads, walkways, stairs, steel constructions, tube arms, on buildings, storage tanks etc.
agricultural storage (vegetables, potatoes, etc.), wine cellars, technical areas in drinking water supply systems
for damp and cold ambient conditions with low duty cycles, please contact us
Key technical data
| Light source | LED |
|---|---|
| LED module standard | Zhaga |
| Exchangeability | light source and control gear not replaceable |
| Connected load | 24 W |
| Luminaire luminous flux | 3710 lm |
| Luminous efficacy | 155 lm/W |
| Colour temperature | 4000 K |
| Colour rendering (CRI) | ≥ 80 |
| Light colour | 840 |
| Admissible ambient temperature Tₐ min | -20 °C |
| Admissible ambient temperature Tₐ max | +40 °C |
| Control gear | ECG |
| No. of control gears | 1 |
| Overload protection | ✓ |
| Short circuit protection | ✓ |
| Energy efficiency class | C |
Lighting technology
| Light distribution | symmetrical wide beam |
|---|---|
| Beam angle | 120 ° |
| Photobiological safety | RG1 |
Service life
| Service life LED | L90>50000 h (@ Ta 25°C), L80>70000 h (@ Ta max), L70>100000 h (@ Ta max) |
|---|
Electrical connection
| Rated voltage | 220 - 240 V |
|---|---|
| Frequency | 50/60 Hz |
| Voltage range AC | 198 - 264 V |
| Connection type | Plug |
| Terminal clamp | 3-polig |
| Clamping range | 0.75 - 2.5 mm² |
| Max. no. with circuit breaker B16 | 16 |
| CB B10/B13/B20 | 11/13/21 |
| CB C10/C13/C16/C20 | 16/21/27/33 |
| Cable gland material | Plastic |
| Cable gland cable diameter | 10 - 14 mm |
Features/Certificates
| Protection class | I |
|---|---|
| IP rating | IP68 (3m), IPX9K |
| IK rating | IK06 |
| Limited surface temperature D | ✓ |
| CE | ✓ |
Mounting
| Mounting method (accessories possibly needed) | Ceiling, Wall |
|---|---|
| Operating position | horizontal, vertical |
| Mounting | 2-point |
| Swivel range | 0 - 360 ° |
| Special features | variable mounting distance, 2 stainless steel pipe clamps (included in scope of delivery) |
Cover
| Cover type | Tube |
|---|---|
| Cover material | PMMA |
| Cover characteristic | satined |
Other features
| Special features | FastConnect (FC), extreme resistance (XR) |
|---|
Dimension/Weight
| Length | 1529.00 mm |
|---|---|
| Width / Diameter | 103.00 mm |
| Height | 83.00 mm |
| Net weight | 2.60 kg |
LED tubular light fitting, PRIMO XR, 24 W, 3710 lm, 155 lm/W, Class I, IP68 (3m), IPX9K, symmetrical wide beam, 4000 K, CRI≥ 80, Ta -20 °C/+40 °C, L90>50000 h (@ Ta 25°C), L80>70000 h (@ Ta max), L70>100000 h (@ Ta max), Tube PMMA satined, FastConnect (FC), extreme resistance (XR), for harmful gases exposed areas (XR), for unprotected outdoor areas (AUS), for swimming pools (SBL), stainless steel pipe clamps included. Extremely gas-tight LED tubular light fitting for areas exposed to harmful gases. Frosted, impact-resistant PMMA tube, welded with end-/connection caps. Aluminum reflector with highly efficient LED modules and ECG with overload and short-circuit protection. Electrical connection via plug connection system (FastConnect), male connector integrated in connection cap, female attached. Two stainless steel pipe clamps, included in the scope of delivery, for quick and easy mounting. Length 1529,00 mm, Width / Diameter 103,00 mm, Height 83,00 mm, Net weight 2,60 kg.
Gross price: 299.00 EUR