KONIC
544 L100R G2 VARIO
LED pole-top light fitting KONIC with variably adjustable luminous flux, consisting of powder-coated die-cast aluminium housing, three-part. Lower part with cable entry, ECG, isolating plug connection and strain relief. Upper part with LED modules, optics and flat safety glass. Braces with cable feed-through. Zhaga LED modules with highly efficient optics, direct beam, Multi-Layer Technology. ECG with high surge protection, overload and short circuit protection. Mounting on straight poles Ø 76mm (see "Optional accessories" for poles Ø 60mm).
Article number: 54405 0009
EAN/GTIN: 4041254407173



General product description
General product benefits
reduction of type diversity due to variably adjustable luminous flux
simple, fast and toolless setting of the luminous flux on-site by means of integrated DIP switch, adjustable at any time
highly economical stocking
long-lasting, corrosion-resistant die-cast aluminium housing with smooth surface without cooling fins
perfect thermal management due to direct connection of the LED modules to the roof, large cooling surface, excellent thermal conductivity
homogenous illumination due to Multi-Layer Technology, i.e. every individual LED illuminates the whole surface, the light distribution curves of the LED are overlapping
removable upper part of the housing and terminal block with isolating plug connection allows comfortable, time- and cost-saving mounting.
problemlose Umrüstung bei technischer Weiterentwicklung der LED durch einfachen Tausch des Gehäuseoberteils. Nach dem Wechsel der LED-Module kann das Gehäuseoberteil wiederverwendet werden
BlackEdition, ULOR=0%
interchangeable components
future proof by using standardised Zhaga LED modules
Applications
promenades, public parks, pedestrian areas, public places etc.
Key technical data
| Light source | LED |
|---|---|
| LED module standard | Zhaga |
| Exchangeability | light source and control gear replaceable by qualified person |
| Connected load | 16 W, 70 W |
| Luminaire luminous flux | 2460 lm, 10080 lm |
| Luminous efficacy | 154 lm/W, 144 lm/W |
| Colour temperature | 4000 K |
| Colour rendering (CRI) | ≥ 70 |
| Light colour | 740 |
| Admissible ambient temperature Tₐ min | -40 °C |
| Admissible ambient temperature Tₐ max | +50 °C |
| Control gear | ECG (NFC-enabled) |
| No. of control gears | 1 |
| Overload protection | ✓ |
| Short circuit protection | ✓ |
| Energy efficiency class | B |
| Overvoltage protection | 10 kV |
| Special features | variable and almost stepless adjustable luminous flux (Attention: only min, max values listed above) |
Lighting technology
| Optical system | Lens optics |
|---|---|
| Optical system material | PMMA |
| Light distribution | rotationally symmetrical beam |
| Photobiological safety | RG1 |
Service life
| Service life LED | L95>100000 h (@ Ta max) |
|---|
Electrical connection
| Rated voltage | 220 - 240 V |
|---|---|
| Frequency | 50/60 Hz |
| Connection type | Plug, Screw terminal |
| Terminal clamp | 3-polig |
| Clamping range | 0.75 - 2.5 mm² |
| Max. no. with circuit breaker B16 | 23 |
| CB B10/B13/B20 | 15/19/29 |
| CB C10/C13/C16/C20 | 23/31/39/47 |
| Cable entries type | blanking plug (1x) |
| Cable gland material | Plastic |
| Cable gland cable diameter | 10 - 14 mm |
Features/Certificates
| Protection class | II |
|---|---|
| IP rating | IP65 |
| IK rating | IK06 |
| CE | ✓ |
Mounting
| Mounting method (accessories possibly needed) | Pole-top mounting |
|---|---|
| Operating position | downwards radiation |
Housing
| Housing material | Die-cast aluminium |
|---|---|
| Varnished | ✓ |
| Colour | grey |
| Colour (RAL/DB) | DB 702 |
Cover
| Cover type | Pane |
|---|---|
| Cover material | Safety glass |
| Cover characteristic | clear |
| Closure type | screwed |
| Closure material | Stainless steel V2A |
Other features
| Special features | ULOR=0% |
|---|---|
| Pressure compensation system | ✓ |
Dimension/Weight
| Width / Diameter | 500.00 mm |
|---|---|
| Height | 660.00 mm |
| Net weight | 9.80 kg |
LED pole-top light fitting, KONIC, 16 W, 70 W, 2460 lm, 10080 lm, 154 lm/W, 144 lm/W, Class II, IP65, rotationally symmetrical beam, 4000 K, CRI≥ 70, Ta -40 °C/+50 °C, L95>100000 h (@ Ta max), Pane Safety glass clear, Closure Stainless steel V2A, Housing Die-cast aluminium, Colour grey, DB 702, ULOR=0%, variable adjustable luminous flux by a built-in DIP switch (Attention: only min, max values listed above). LED pole-top light fitting KONIC with variably adjustable luminous flux, consisting of powder-coated die-cast aluminium housing, three-part. Lower part with cable entry, ECG, isolating plug connection and strain relief. Upper part with LED modules, optics and flat safety glass. Braces with cable feed-through. Zhaga LED modules with highly efficient optics, direct beam, Multi-Layer Technology. ECG with high surge protection, overload and short circuit protection. Mounting on straight poles Ø 76mm (see "Optional accessories" for poles Ø 60mm). interchangeability of components (no disposable light fitting), Width / Diameter 500,00 mm, Height 660,00 mm, Net weight 9,80 kg.
Gross price: 1274.00 EUR
Downloads
- Product image (png | 56KB)
- Dimension drawing (png | 49KB)
- 3D-CAD model (stp | 590KB)
- Data sheet (pdf | 230KB)
- Series data sheet (pdf | 748KB)
- Flyer (pdf | 781KB)
- Polar diagram (png | 189KB)
- EULUMDAT (ldt | 107KB)
- Operating instructions (pdf | 1MB)
- EU Declaration of Conformity (pdf | 446KB)
- Additional information (pdf | 778KB)
- label (png | 78KB)