KONIC
544 1603 G2 730 RFLO
LED pole-top light fitting KONIC, consisting of powder-coated die-cast aluminium housing, three-part. Lower part with cable entry, ECG, isolating plug connection and strain relief. Upper part with LED modules, optics and flat safety glass. Braces with cable feed-through. Zhaga LED modules with highly efficient optics, direct beam, Multi-Layer Technology. ECG with high surge protection, overload and short circuit protection. Mounting on straight poles Ø 76mm (see "Optional accessories" for poles Ø 60mm). Thanks to their Zhaga Book 18-compliant base and integrated D4i control gear, RFL luminaires are optimally prepared for “plug-and-play” use with a light management system or sensor technology (e.g. motion detectors). To avoid functional limitations or possible damage to the system, we strongly advise against using components that are not D4i-certified.
Article number: 54406 0005
EAN/GTIN: 4041254407289
General product description
General product benefits
later use of a light management system possible at any time
quick assembly of the light management system components, no tools required
standardized Zhaga socket allow free choice of light management system
long-lasting, corrosion-resistant die-cast aluminium housing with smooth surface without cooling fins
perfect thermal management due to direct connection of the LED modules to the roof, large cooling surface, excellent thermal conductivity
homogenous illumination due to Multi-Layer Technology, i.e. every individual LED illuminates the whole surface, the light distribution curves of the LED are overlapping
removable upper part of the housing and terminal block with isolating plug connection allows comfortable, time- and cost-saving mounting.
problemlose Umrüstung bei technischer Weiterentwicklung der LED durch einfachen Tausch des Gehäuseoberteils. Nach dem Wechsel der LED-Module kann das Gehäuseoberteil wiederverwendet werden
BlackEdition, ULOR=0%
interchangeable components
future proof by using standardised Zhaga LED modules
Applications
residential areas, residential and by-roads, traffic-calmed zones, walkways and cycle lanes etc.
Key technical data
| Light source | LED |
|---|---|
| LED module standard | Zhaga |
| Exchangeability | light source and control gear replaceable by qualified person |
| Connected load | 35 W |
| Luminaire luminous flux | 4920 lm |
| Luminous efficacy | 141 lm/W |
| Colour temperature | 3000 K |
| Colour rendering (CRI) | ≥ 70 |
| Light colour | 730 |
| Admissible ambient temperature Tₐ min | -40 °C |
| Admissible ambient temperature Tₐ max | +50 °C |
| Control gear | ECG (NFC-enabled) |
| No. of control gears | 1 |
| Overload protection | ✓ |
| Short circuit protection | ✓ |
| Energy efficiency class | C |
| Overvoltage protection | 10 kV |
Lighting control
| Light management system | Ready for Light Management Systems (RFL) |
|---|
Lighting technology
| Optical system | Lens optics |
|---|---|
| Optical system material | PMMA |
| Light distribution | asymmetrical wide beam |
| Photobiological safety | RG1 |
Service life
| Service life LED | L95>100000 h (@ Ta max) |
|---|
Electrical connection
| Rated voltage | 220 - 240 V |
|---|---|
| Frequency | 50/60 Hz |
| Connection type | Plug, Screw terminal |
| Terminal clamp | 3-polig |
| Clamping range | 0.75 - 2.5 mm² |
| Max. no. with circuit breaker B16 | 23 |
| CB B10/B13/B20 | 15/19/29 |
| CB C10/C13/C16/C20 | 23/31/39/47 |
| Cable entries type | blanking plug (1x) |
| Cable gland material | Plastic |
| Cable gland cable diameter | 10 - 14 mm |
Features/Certificates
| Protection class | II |
|---|---|
| IP rating | IP65 |
| IK rating | IK06 |
| CE | ✓ |
Mounting
| Mounting method (accessories possibly needed) | Pole-top mounting |
|---|---|
| Operating position | downwards radiation |
Housing
| Housing material | Die-cast aluminium |
|---|---|
| Varnished | ✓ |
| Colour | grey |
| Colour (RAL/DB) | DB 702 |
Cover
| Cover type | Pane |
|---|---|
| Cover material | Safety glass |
| Cover characteristic | clear |
| Closure type | screwed |
| Closure material | Stainless steel V2A |
Other features
| Special features | ULOR=0% |
|---|---|
| Pressure compensation system | ✓ |
Dimension/Weight
| Width / Diameter | 500.00 mm |
|---|---|
| Height | 671.00 mm |
| Net weight | 9.60 kg |
LED pole-top light fitting, KONIC, 35 W, 4920 lm, 141 lm/W, Class II, IP65, asymmetrical wide beam, 3000 K, CRI≥ 70, Ta -40 °C/+50 °C, L95>100000 h (@ Ta max), Ready for Light Management Systems (RFL), socket on the top (RFLO), Pane Safety glass clear, Closure Stainless steel V2A, Housing Die-cast aluminium, Colour grey, DB 702, ULOR=0%. LED pole-top light fitting KONIC, consisting of powder-coated die-cast aluminium housing, three-part. Lower part with cable entry, ECG, isolating plug connection and strain relief. Upper part with LED modules, optics and flat safety glass. Braces with cable feed-through. Zhaga LED modules with highly efficient optics, direct beam, Multi-Layer Technology. ECG with high surge protection, overload and short circuit protection. Mounting on straight poles Ø 76mm (see "Optional accessories" for poles Ø 60mm). Thanks to their Zhaga Book 18-compliant base and integrated D4i control gear, RFL luminaires are optimally prepared for “plug-and-play” use with a light management system or sensor technology (e.g. motion detectors). To avoid functional limitations or possible damage to the system, we strongly advise against using components that are not D4i-certified. interchangeability of components (no disposable light fitting), Width / Diameter 500,00 mm, Height 671,00 mm, Net weight 9,60 kg.
Gross price: 1252.00 EUR
