51 L100 VARIO 730

General product description

General product benefits

reduction of type diversity due to variably adjustable luminous flux

simple, fast and toolless setting of the luminous flux on-site by means of integrated DIP switch, adjustable at any time

high flexibility due to variable luminous flux setting

highly economical stocking

long-lasting, corrosion-resistant die-cast aluminium housing with smooth surface without cooling fins

quick and easy mounting due to toolless opening of the light fitting by means of a central toggle clamp lever

no uncomfortable "working overhead", light fitting opens upwards

pre-assembled universal pole attachment for pole spigot 60 and 76 for pole attachment or pole top mounting

easy insertion of the cable into the terminal compartment due to cable gland

tool-free exchange of the LED board (carrier plate, disconnect plug, clamping spring) as well as ECG exchange (carrier plate, disconnect plug, clamping spring)

time- and cost-saving component replacement at the end of service life or retrofitting in the event of further technical development or the use of other / warmest light colours

homogenous illumination due to Multi-Layer Technology

integrated pressure compensation system prevents condensation inside the light fitting

no light emission into the upper half space, ULOR=0

versions dimmable to 10% and with color temperature up to 3,000 K comply with Dark Sky requirements

components tool-free interchangeable

future proof by using standardised Zhaga LED modules

Applications

residential streets, main and by-roads, roundabouts, walkways and cycle lanes, traffic-calmed zones, streets on factory sites, parking areas, car parks, gateways etc.

Key technical data

Lighting technology

Service life

Electrical connection

Features/Certificates

Mounting

Housing

Cover

Other features

Dimension/Weight

LED outdoor light fitting, VIA, 16 W, 70 W, 2580 lm, 10400 lm, 161 lm/W, 149 lm/W, Class II, IP66, asymmetrical wide beam, 3000 K, CRI≥ 70, Ta -40 °C/+40 °C, L95>100000 h (@ Ta max), Pane Safety glass clear, Housing Die-cast aluminium, Colour grey, DB 702, variable adjustable luminous flux by a built-in DIP switch (Attention: only min, max values listed above). LED outdoor light fitting VIA with variably adjustable luminous flux. Consisting of powder-coated die-cast aluminum housing, hinged, with safety clip. LED module(s) and ECG mounted on tool-free removable support plates in the upper part of the housing. Cable entry with gland and strain relief, disconnect plug connection and pressure equalization system in the lower part of the housing, flat safety glass, silicone seal, central locking made of aluminum. Zhaga compliant LED modules with high efficiency optics, direct beam, multi-layer technology. ECG with high surge voltage resistance, overload and short circuit protection. Universal mast spigot made of die-cast aluminum for mast spigot 60/76 for mast mounting or mast mounting. Separate reducing accessories are required for mast spigot 42. Tilt adjustment 0°, 5°, 10°, 15° for surface mounting, 0°, -5°, -10°, -15° for surface mounting, scaling on luminaire housing. interchangeability of components (no disposable light fitting) Length 643,00 mm, Width / Diameter 313,00 mm, Height 218,00 mm, Net weight 8,60 kg.