VIA
51 3203 730
LED outdoor light fitting VIA consisting of powder-coated die-cast aluminum housing, hinged, with safety clip. LED module(s) and ECG mounted on tool-free removable support plates in the upper part of the housing. Cable entry with gland and strain relief, disconnect plug connection and pressure equalization system in the lower part of the housing, flat safety glass, silicone seal, central locking made of aluminum. Zhaga compliant LED modules with high efficiency optics, direct beam, multi-layer technology. ECG with high surge voltage resistance, overload and short circuit protection. Universal mast spigot made of die-cast aluminum for mast spigot 60/76 for mast mounting or mast mounting. Separate reducing accessories are required for mast spigot 42. Tilt adjustment 0°, 5°, 10°, 15° for surface mounting, 0°, -5°, -10°, -15° for surface mounting, scaling on luminaire housing.
Article number: 51000 0048
EAN/GTIN: 4041254379524
General product description
General product benefits
long-lasting, corrosion-resistant die-cast aluminium housing with smooth surface without cooling fins
quick and easy mounting due to toolless opening of the light fitting by means of a central toggle clamp lever
no uncomfortable "working overhead", light fitting opens upwards
pre-assembled universal pole attachment for pole spigot 60 and 76 for pole attachment or pole top mounting
easy insertion of the cable into the terminal compartment due to cable gland
tool-free exchange of the LED board (carrier plate, disconnect plug, clamping spring) as well as ECG exchange (carrier plate, disconnect plug, clamping spring)
time- and cost-saving component replacement at the end of service life or retrofitting in the event of further technical development or the use of other / warmest light colours
homogenous illumination due to Multi-Layer Technology
integrated pressure compensation system prevents condensation inside the light fitting
no light emission into the upper half space. ULOR=0
versions dimmable to 10% and with color temperature up to 3,000 K comply with Dark Sky requirements
components tool-free interchangeable
future proof by using standardised Zhaga LED modules
Applications
residential streets, main and by-roads, roundabouts, walkways and cycle lanes, traffic-calmed zones, streets on factory sites, parking areas, car parks, gateways etc.
Key technical data
| Light source | LED |
|---|---|
| LED module standard | Zhaga |
| Exchangeability | light source and control gear replaceable by qualified person |
| Connected load | 70 W |
| Luminaire luminous flux | 10400 lm |
| Luminous efficacy | 149 lm/W |
| Colour temperature | 3000 K |
| Colour rendering (CRI) | ≥ 70 |
| Light colour | 740 |
| Admissible ambient temperature Tₐ min | -40 °C |
| Admissible ambient temperature Tₐ max | +40 °C |
| Control gear | ECG (NFC-enabled) |
| No. of control gears | 1 |
| Overload protection | ✓ |
| Short circuit protection | ✓ |
| Energy efficiency class | C |
| Overvoltage protection | 10 kV |
Lighting technology
| Optical system | Lens optics |
|---|---|
| Optical system material | PMMA |
| Light distribution | asymmetrical wide beam |
| Photobiological safety | RG1 |
Service life
| Service life LED | L95>100000 h (@ Ta max) |
|---|
Electrical connection
| Rated voltage | 220 - 240 V |
|---|---|
| Frequency | 50/60 Hz |
| Connection type | Plug, Screw terminal |
| Terminal clamp | 3-polig |
| Clamping range | 0.75 - 2.5 mm² |
| Max. no. with circuit breaker B16 | 10 |
| CB B10/B13/B20 | 7/9/13 |
| CB C10/C13/C16/C20 | 10/13/17/20 |
| Cable entries type | blanking plug (1x) |
| Cable gland material | Plastic |
| Cable gland cable diameter | 9 - 14 mm |
Features/Certificates
| Protection class | II |
|---|---|
| IP rating | IP66 |
| IK rating | IK09 |
| CE | ✓ |
| VDE | ✓ |
| ENEC | ✓ |
Mounting
| Mounting method (accessories possibly needed) | Side-entry mounting, Pole-top mounting |
|---|---|
| Operating position | downwards radiation |
| Side-entry mounting | Ø 60mm x 100mm, Ø 76mm x 90mm |
Housing
| Housing material | Die-cast aluminium |
|---|---|
| Varnished | ✓ |
| Colour | grey |
| Colour (RAL/DB) | DB 702 |
Cover
| Cover type | Pane |
|---|---|
| Cover material | Safety glass |
| Cover characteristic | clear |
| Closure type | screwed |
Other features
| Pressure compensation system | ✓ |
|---|
Dimension/Weight
| Length | 643.00 mm |
|---|---|
| Width / Diameter | 313.00 mm |
| Height | 218.00 mm |
| Net weight | 8.50 kg |
LED outdoor light fitting, VIA, 70 W, 10400 lm, 149 lm/W, Class II, IP66, asymmetrical wide beam, 3000 K, CRI≥ 70, Ta -40 °C/+40 °C, L95>100000 h (@ Ta max), Pane Safety glass clear, Housing Die-cast aluminium, Colour grey, DB 702. LED outdoor light fitting VIA consisting of powder-coated die-cast aluminum housing, hinged, with safety clip. LED module(s) and ECG mounted on tool-free removable support plates in the upper part of the housing. Cable entry with gland and strain relief, disconnect plug connection and pressure equalization system in the lower part of the housing, flat safety glass, silicone seal, central locking made of aluminum. Zhaga compliant LED modules with high efficiency optics, direct beam, multi-layer technology. ECG with high surge voltage resistance, overload and short circuit protection. Universal mast spigot made of die-cast aluminum for mast spigot 60/76 for mast mounting or mast mounting. Separate reducing accessories are required for mast spigot 42. Tilt adjustment 0°, 5°, 10°, 15° for surface mounting, 0°, -5°, -10°, -15° for surface mounting, scaling on luminaire housing. interchangeability of components (no disposable light fitting) Length 643,00 mm, Width / Diameter 313,00 mm, Height 218,00 mm, Net weight 8,50 kg.
Gross price: 815.00 EUR
| Item name | Item description | Item no. |
|---|---|---|
| ABD 51 ESGW | safety glass pane clear | 51010 9000 |
| RZ 76/42 VIA | 90309 0001 |