ExeLed 2 N
nD867F 12L42/3/4 DIMDI
Explosion-protected LED emergency light fitting ExeLED 2 N for zone 2/22. Glass fibre reinforced polyester housing, frosted cover made of polycarbonate with silicone gasket and stainless steel clips, two of them as safety clip. Steel reflector, varnished, carrying the LED modules and all electrical components, clipped into the cover, removable as a unit. ECG with automatic monitoring according to EN 62034 and optical indication of the test results. Incorporated NiMH battery with electronic charger, deep discharge protection according to EN 61347-2-7, short circuit protected battery and reverse battery protection. Recharging time: 24h according to EN 60598-2-22. External mounting system for variable mounting (accessory). See „Technical data“ for details.
Article number: 86705 0114
EAN/GTIN: 4041254428123
General product description
General product benefits
Security in case of emergency - instant light with maximum luminous flux
operation in maintained, switched maintained or stand-by mode
multifunctional LED with coded indication of functions, states and potential faults of the electronic device or the battery
automatic weekly function test
automatic annual duration test, manual actuation possible at any time
easy battery replacement due to plug connection
LED modules protected against mechanical and electrostatic damage by sandwich design of reflector and cover
homogenous illumination due to frosted cover for comfortable perception of light and brilliant glare limitation
high colour rendering index CRI≥80, according to the workplace guidelines suitable for nearly all plant locations
FastFix mounting system - external mounting system for variable mounting distances and easy installation (accessory)
interchangeable components
Applications
hazardous areas zone 2 (gas) and zone 22 (dust)
light fitting is not suitable for use in areas with permanently high humiditiy and short operation time, e.g. sewage plants and rainwater retention basins
safety lighting of workplaces with particular risk as well as illumination / marking of escape and rescue routes
Key technical data
| Light source | LED |
|---|---|
| LED module standard | Zhaga |
| Exchangeability | light source with reflector and control gear replaceable by qualified person |
| Connected load | 29 W |
| Luminaire luminous flux | 4360 lm |
| Luminous efficacy | 150 lm/W |
| Colour temperature | 5000 K |
| Colour rendering (CRI) | ≥ 80 |
| Light colour | 850 |
| Admissible ambient temperature Tₐ min | -30 °C |
| Admissible ambient temperature Tₐ max | +40 °C |
| Control gear | ECG |
| No. of control gears | 1 |
| Overload protection | ✓ |
| Short circuit protection | ✓ |
Lighting control
| Dimmable | ✓ |
|---|---|
| Dimming method | DALI (DIMD) |
| Dimming range | 6 - 100 % |
| DALI-addresses per luminaire | 1 |
| DALI-standard | DT1, DT6 |
Lighting technology
| Light distribution | wide beam |
|---|---|
| Photobiological safety | RG1 |
Service life
| Service life LED | L80B50>100000 h (@ Ta max), L80B50>100000 h (@ Ta 25°C), L90B50>90000 h (@ Ta 25°C) |
|---|
Electrical connection
| Rated voltage | 220 - 240 V |
|---|---|
| Frequency | 50/60 Hz |
| Connection type | Cage clamp |
| Terminal clamp | 6-polig |
| Clamping range | 0.75 - 2.5 mm² |
| Max. no. with circuit breaker B16 | 18 |
| CB B10/B13/B20 | 12/15/23 |
| CB C10/C13/C16/C20 | 18/24/30/37 |
| Cable entries type | screw plug (1x), cable gland (2x) |
| Cable entries size | M25 (3x) |
| Cable gland material | Plastic |
| Cable gland cable diameter | 8 - 17 mm |
| In-out wiring (RR) | ✓ |
Features/Certificates
| Protection class | I |
|---|---|
| IP rating | IP66 |
| IK rating | IK10 |
| CE | ✓ |
Mounting
| Mounting method (accessories possibly needed) | Ceiling, Ceiling with bracket, Ceiling with angle, Wall, Wall with bracket, Wall with angle, Suspended, Mounting rail |
|---|---|
| Operating position | downwards radiation, forwards radiation, vertical, horizontal |
| Mounting | 2-point |
Housing
| Housing material | Glass fibre reinforced polyester |
|---|---|
| Colour | grey |
Cover
| Cover type | Diffuser |
|---|---|
| Cover material | PC |
| Closure type | Clips |
| Closure material | Stainless steel (1.4571) |
Dimension/Weight
| Length | 1250.00 mm |
|---|---|
| Width / Diameter | 182.00 mm |
| Height | 114.00 mm |
| Net weight | 6.30 kg |
Explosion-protected LED emergency light fitting, ExeLed 2 N, EX-Zone 2/22, 29 W, 4360 lm, 150 lm/W, self-contained (MA), Self test, Operating time 3 h, 750 lm, Class I, IP66, wide beam, 5000 K, CRI≥ 80, Ta -30 °C/+40 °C, L80B50>100000 h (@ Ta max), L80B50>100000 h (@ Ta 25°C), L90B50>90000 h (@ Ta 25°C), DALI (DIMD), Diffuser PC, Closure Stainless steel (1.4571), Housing Glass fibre reinforced polyester, Colour grey. Explosion-protected LED emergency light fitting ExeLED 2 N for zone 2/22. Glass fibre reinforced polyester housing, frosted cover made of polycarbonate with silicone gasket and stainless steel clips, two of them as safety clip. Steel reflector, varnished, carrying the LED modules and all electrical components, clipped into the cover, removable as a unit. ECG with automatic monitoring according to EN 62034 and optical indication of the test results. Incorporated NiMH battery with electronic charger, deep discharge protection according to EN 61347-2-7, short circuit protected battery and reverse battery protection. Recharging time: 24h according to EN 60598-2-22. External mounting system for variable mounting (accessory). See „Technical data“ for details. interchangeability of components (no disposable light fitting) Length 1250,00 mm, Width / Diameter 182,00 mm, Height 114,00 mm, Net weight 6,30 kg.
Gross price: 914.00 EUR