ExeLED 1
e865F 06L22 T40
Explosion-protected LED light fitting ExeLED 1 for zone 1/21. Glass fibre reinforced polyester housing, frosted cover made of polycarbonate with silicone gasket and stainless steel clips, two of them as safety clip. Steel reflector, varnished, carrying the encapsulated LED modules, clipped into the cover, removable as a unit. Encapsulated ECG with overvoltage, overload and short circuit protection. External mounting system for variable mounting (accessory).
Article number: 86500 0065
EAN/GTIN: 4041254401546
General product description
General product benefits
for application in food industry areas, in accordance with IFS/BRC/VDMA standards, applicable without restrictions in plants, that have to fulfil the HACCP Concept
innovative LED encapsulation with high transmission factor for least loss of light
LED modules protected against mechanical and electrostatic damage by sandwich design of reflector and cover
homogenous illumination due to frosted cover for comfortable perception of light and brilliant glare limitation
high colour rendering index CRI≥80, according to the workplace guidelines suitable for nearly all plant locations
FastFix mounting system - external mounting system for variable mounting distances and easy installation (accessory)
interchangeable components
Applications
hazardous areas zone 1 (gas) and zone 21 (dust)
food industry, food processing factories and suppliers to the food industry that have to fulfil IFS, BRC or HACCP standards or comparably strict requirements (e.g. production of food packaging). The light fitting is not sutiable for cleaning with cleaning and disinfection agents as well as for cleaning with high pressure cleaners
light fitting is not suitable for use in areas with permanently high humiditiy and short operation time, e.g. sewage plants and rainwater retention basins
Key technical data
| Light source | LED |
|---|---|
| LED module standard | Zhaga |
| Exchangeability | light source with reflector and control gear replaceable by qualified person |
| Connected load | 15 W |
| Luminaire luminous flux | 2170 lm |
| Luminous efficacy | 145 lm/W |
| Colour temperature | 6500 K |
| Colour rendering (CRI) | ≥ 80 |
| Light colour | 865 |
| Admissible ambient temperature Tₐ min | -40 °C |
| Admissible ambient temperature Tₐ max | +55 °C |
| Control gear | ECG |
| No. of control gears | 1 |
| Overload protection | ✓ |
| Short circuit protection | ✓ |
| Energy efficiency class | C |
Lighting technology
| Light distribution | wide beam |
|---|---|
| Photobiological safety | RG1 |
Service life
| Service life LED | L80B50>100000 h (@ Ta max), L80B50>100000 h (@ Ta 25°C), L90B50>85000 h (@ Ta 25°C) |
|---|
Electrical connection
| Rated voltage | 220 - 240 V |
|---|---|
| Frequency | 0 Hz, 50/60 Hz |
| Connection type | Cage clamp |
| Terminal clamp | 3-polig |
| Clamping range | 1 - 4 mm² |
| Max. no. with circuit breaker B16 | 19 |
| CB B10/B13/B20 | 12/16/24 |
| CB C10/C13/C16/C20 | 19/25/32/39 |
| Cable entries type | screw plug (1x), cable gland (2x) |
| Cable entries size | M25 (3x) |
| Cable gland material | Plastic |
| Cable gland cable diameter | 8 - 17 mm |
| In-out wiring (RR) | ✓ |
Features/Certificates
| Protection class | I |
|---|---|
| IP rating | IP66 |
| IK rating | IK10 |
| CE | ✓ |
Mounting
| Mounting method (accessories possibly needed) | Ceiling with bracket, Ceiling with angle, Wall with bracket, Wall with angle, Suspended, Pole with pipe clamp, Pipe clamp |
|---|---|
| Operating position | downwards radiation, forwards radiation, vertical, horizontal |
| Mounting | 2-point |
Housing
| Housing material | Glass fibre reinforced polyester |
|---|---|
| Colour | grey |
Cover
| Cover type | Diffuser |
|---|---|
| Cover material | PC |
| Cover characteristic | satined |
| Closure type | Clips |
| Closure material | Stainless steel (1.4571) |
Dimension/Weight
| Length | 678.00 mm |
|---|---|
| Width / Diameter | 182.00 mm |
| Height | 114.00 mm |
| Net weight | 4.65 kg |
Explosion-protected LED light fitting, ExeLED 1, EX-Zone 1/21/2/22, 15 W, 2170 lm, 145 lm/W, Class I, IP66, wide beam, 6500 K, CRI≥ 80, Ta -40 °C/+55 °C, L80B50>100000 h (@ Ta max), L80B50>100000 h (@ Ta 25°C), L90B50>85000 h (@ Ta 25°C), Diffuser PC satined, Closure Stainless steel (1.4571), Housing Glass fibre reinforced polyester, Colour grey. Explosion-protected LED light fitting ExeLED 1 for zone 1/21. Glass fibre reinforced polyester housing, frosted cover made of polycarbonate with silicone gasket and stainless steel clips, two of them as safety clip. Steel reflector, varnished, carrying the encapsulated LED modules, clipped into the cover, removable as a unit. Encapsulated ECG with overvoltage, overload and short circuit protection. External mounting system for variable mounting (accessory). interchangeability of components (no disposable light fitting) Length 678,00 mm, Width / Diameter 182,00 mm, Height 114,00 mm, Net weight 4,65 kg.
Gross price: 883.00 EUR