161 15L34 AUS ZB
Sturdy LED damp-proof light fitting for unprotected outdoor areas for connection to central power supply systems. Highly impact-resistant glass fibre reinforced polyester housing and frosted diffuser with high impact resistance and UV resistance. Captive clips, multi-part, incl. two safety clips, silicone gasket and pressure compensation system. Powder-coated aluminium reflector with highly efficient Zhaga LED modules and ECG with overload and short circuit protection.
Article number: 16118 0105
EAN/GTIN: 4041254295145
General product description
General product benefits
sturdy, extremely reliable high-quality light fitting for application in unprotected outdoor areas
high impact resistant housing, chemical and UV resistant
diffuser with high mechanical and UV-resistance
UV, ozone, weather, chemical and ageing resistant profile gasket
pressure compensation system to prevent condensation inside the light fitting
100% luminous flux even in emergency operation
highly efficient by using high-quality ECG and LED modules
homogenous illumination due to frosted diffuser, comfortable perception of light and brilliant glare limitation
interchangeable components
future proof by using standardised Zhaga LED modules
Applications
humid, wet and dusty indoor areas and sheltered outdoor areas as replacement lighting in the event of a power failure, or as safety lighting to illuminate escape and rescue routes
unprotected outdoor areas, e.g. mounted to industrial plants, external gangways, stairs, walls, ceilings, doors, bus stops, train stations,subways, construction sites, under canopies etc. The light is not to be used in areas with high mechanical stress (wind) or seldom usage (i.e. maintenance and inspection only).
Key technical data
| Light source | LED |
|---|---|
| LED module standard | Zhaga |
| Exchangeability | light source and control gear replaceable by qualified person |
| Connected load | 21 W |
| Luminaire luminous flux | 3440 lm |
| Luminous efficacy | 164 lm/W |
| Colour temperature | 4000 K |
| Colour rendering (CRI) | ≥ 80 |
| Light colour | 840 |
| Admissible ambient temperature Tₐ min | -20 °C |
| Admissible ambient temperature Tₐ max | +40 °C |
| Control gear | ECG |
| No. of control gears | 1 |
| Overload protection | ✓ |
| Short circuit protection | ✓ |
Lighting technology
| Light distribution | symmetrical wide beam |
|---|---|
| Beam angle | 120 ° |
| Photobiological safety | RG1 |
Service life
| Service life LED | L90>50000 h (@ Ta 25°C), L80>70000 h (@ Ta max), L70>100000 h (@ Ta max) |
|---|
Electrical connection
| Rated voltage | 220 - 240 V |
|---|---|
| Frequency | 0 Hz, 50/60 Hz |
| Voltage range AC | 198 - 264 V |
| Connection type | Cage clamp |
| Terminal clamp | 3-polig |
| Clamping range | 0.75 - 2.5 mm² |
| Max. no. with circuit breaker B16 | 16 |
| CB B10/B13/B20 | 11/13/21 |
| CB C10/C13/C16/C20 | 16/21/27/33 |
| Cable entries type | pressure compensation element (1x), cable gland (1x) |
| Cable entries size | M20 (2x) |
| Cable gland material | Plastic |
| Cable gland cable diameter | 6 - 13 mm |
Features/Certificates
| Protection class | I |
|---|---|
| IP rating | IP65 |
| IK rating | IK05 |
| Limited surface temperature D | ✓ |
| CE | ✓ |
Mounting
| Mounting method (accessories possibly needed) | Ceiling, Wall, Ceiling with bracket, Ceiling with angle, Suspended, Mounting rail, Wall with bracket, Wall with angle |
|---|---|
| Operating position | downwards radiation, forwards radiation, horizontal |
| Mounting | 2-point |
Housing
| Housing material | Glass fibre reinforced polyester |
|---|---|
| Colour | grey |
Cover
| Cover type | Diffuser |
|---|---|
| Cover material | PMMA |
| Cover characteristic | satined |
| Closure type | Clips |
| Closure material | Plastic |
Other features
| Pressure compensation system | ✓ |
|---|
Dimension/Weight
| Length | 1572.00 mm |
|---|---|
| Width / Diameter | 116.00 mm |
| Height | 125.00 mm |
| Net weight | 2.93 kg |
LED emergency light fitting, 21 W, 3440 lm, 164 lm/W, central supply (ZB), Class I, IP65, symmetrical wide beam, 4000 K, CRI≥ 80, Ta -20 °C/+40 °C, L90>50000 h (@ Ta 25°C), L80>70000 h (@ Ta max), L70>100000 h (@ Ta max), Diffuser PMMA satined, Closure Plastic, Housing Glass fibre reinforced polyester, Colour grey, for unprotected outdoor areas (AUS). Sturdy LED damp-proof light fitting for unprotected outdoor areas for connection to central power supply systems. Highly impact-resistant glass fibre reinforced polyester housing and frosted diffuser with high impact resistance and UV resistance. Captive clips, multi-part, incl. two safety clips, silicone gasket and pressure compensation system. Powder-coated aluminium reflector with highly efficient Zhaga LED modules and ECG with overload and short circuit protection. interchangeability of components (no disposable light fitting) Length 1572,00 mm, Width / Diameter 116,00 mm, Height 125,00 mm, Net weight 2,93 kg.