News and Information

Illumination systems with reflector light fittings and high pressure lamps are still popular in the industrial sectors. However, this sort of equipment isn't just an inefficient solution but it also supplies a moderate light quality as well as quite a poor colour rendition.
Modern large area light fittings of series 192... ST from SCHUCH, however, are highly efficient light solutions with an excellent light quality.

The new LED floodlight d9000...  is extremely impressive due to the high light output of its 42 highpower LED. The effective luminous flux of the light fitting is 10,200 lumen maximum with a relative light efficiency of 76 to 92 lm/W. Therefore it is considered an adequate alternative to a conventional 250W HIT/HSE floodlight.

Conventional emergency light fittings with an incorporated battery set may usually be applied at a temperature range from -5°C up to +30°C /40°C only. In case of ambient temperatures below -5°C these light fittings are subject to quite extensive modifications which, however, cannot at all compensate the considerable deficits of fluorescent tubes used for an emergency operation.  

It may happen that in practical experience vandal-proof light fittings must bear up against massive violent attacks and that after such an attack their function must still be okay and reliable i.e. the light must not go out neither during nor after the attack. Reliable illumination of the environment must go on.